A ring main unit (RMU) is a type of switchgear used in ring network power supply systems.
The expandable SF6 ring main unit can be combined freely, features a compact size, and is safe, reliable, and maintenance-free. The load switch uses SF6 gas as the insulation and arc-extinguishing medium. The constant-magnetic-field rotating-arc method gives it strong arc-extinguishing capability, good breaking performance, low overvoltage, long electrical life, and a maintenance-free arc-extinguishing chamber.
The load switch-fuse combination apparatus has a three-position function, reliable sealing, and a reliable operating mechanism and interlock. The earthing switch has a short-circuit making function. The cabinet enclosure is made of aluminum-zinc-coated steel sheet formed by stamping and bending, and is sturdy and reliable.

1.Main Components of the Ring Main Unit
An RMU generally consists of the following compartments:
- Switchgear compartment
- Busbar compartment
- Cable compartment
- Operating mechanism compartment
- Control and protection compartment
The main primary components of an RMU include:
1.1 Load Break Switch
The load switch has a certain load-breaking capability, that is, it can be opened with live load under light load, but it cannot be operated frequently. General load switches are equipped with fuses, and their arc-extinguishing capability is stronger than that of disconnectors.
1.2 Disconnector (Isolating Switch)
After the circuit breaker disconnects the circuit, the disconnector provides a clear isolation between the live and non-live parts, serving as an auxiliary switch. Since the external indicator of the circuit breaker contact position lacks intuitiveness and in some cases cannot guarantee that its indication is consistent with the contact position, it is necessary to use a disconnector to clearly separate the live and non-live parts. In addition, the disconnector has a certain natural arc-extinguishing capability and is often used for switching in and out equipment with very small currents such as voltage transformers and surge arresters, as well as at the connection point between one circuit breaker and several pieces of equipment, making the changeover through the disconnector more flexible and convenient.
1.3 Circuit Breaker
A switching device capable of making, carrying, and breaking currents under normal circuit conditions and capable of making and, within a specified time, carrying and breaking currents under abnormal circuit conditions.
1.4 Earthing Switch
It is mainly used for equipment maintenance. To prevent sudden energization during maintenance, both ends of the equipment under maintenance must be earthed. The earthing switch of a high-voltage switchgear is generally used for earthing on the outgoing load side. When maintaining the load side of the high-voltage switchgear (such as tightening bolts, installing or removing cables, etc.), the switch must be opened and the earthing switch of the switchgear closed at the same time. This can prevent electric shock accidents caused by sudden energization and can also discharge residual charge, which is beneficial to maintenance safety.
1.5 Contactor
A contactor cannot make and break load current and is suitable for frequent operation occasions.
2. Intelligent Distribution System
2.1 Real-time monitoring of operating conditions
Remote monitoring and control of the ring main unit. Remote monitoring of line load, real-time grasp of the load conditions of each branch line and section line, timely discovery of overloaded lines, and improvement of the lean level of power grid planning.
2.2 Remote control function
Reduce the on-site switching operation workload of teams, reduce switching operation time, and shorten the operation time from the original 2.5 hours to 0.5 hours. The operation of the hot-standby line tie switch realizes rapid load transfer and realizes rapid and flexible adjustment of distribution network operation modes.
3. Feeder Automation (FA) Function
After a line fault causes a trip, the master station determines the fault area based on terminal telemetry signals and automatically isolates the fault.
Fault finding time is shortened from about 2 hours to about 2 minutes.
Power supply reliability is improved from the original 99.96% to 99.997%.
The intelligent ring main unit realizes technical processes such as fault location, fault isolation, load monitoring, line transfer, and live closed-loop transfer. To realize automatic restoration and self-healing of lines after fault elimination in the distribution network, the most basic requirement is efficient intelligent equipment. Intelligent distribution network self-healing means that the distribution system can timely detect system faults, issue early warnings for unsafe system states, and perform corresponding operations so that it does not affect normal power supply to users or minimizes the impact.
The ring main unit uses digital technology to monitor the conditions for switch opening (closing), connects appropriate tie lines according to the line operation mode, and connects power grids in separated areas, indirectly enabling automated monitoring without excessive equipment investment. Through remote control operation by the "human-machine decision system," the power supply capacity of the area is increased under slight adjustment of the operation mode.
4.Distribution automation
Automated management of monitoring and control of the 10 kV system distribution network, optimization of urban distribution network structure, rational and efficient power consumption management, timely early warning of accidents, and timely fault handling.
The ring main unit and its DTU terminal are the basic units of distribution automation and an important part of the entire distribution automation system. The intelligent ring main unit automation complete equipment can realize technical processes such as fault location, fault isolation, load monitoring, line transfer, and live closed-loop transfer. To realize automatic restoration and self-healing of lines after fault elimination in the distribution network, the most basic requirement is efficient intelligent equipment.
